作业帮英语翻译Hydraulic oil TemperatureThe temperature of hydraulic oil must be maintained at aproper temperature to keep the moulding cycle timeconstant.The ideal temperature is 45℃.Adjust thetemperature control valve (Fig.2-2 3 ) to keep the oiltem
来源：学生作业帮助网 编辑：作业帮 时间：2024/11/05 19:26:54
英语翻译Hydraulic oil TemperatureThe temperature of hydraulic oil must be maintained at aproper temperature to keep the moulding cycle timeconstant.The ideal temperature is 45℃.Adjust thetemperature control valve (Fig.2-2 3 ) to keep the oiltem
英语翻译
Hydraulic oil Temperature
The temperature of hydraulic oil must be maintained at aproper temperature to keep the moulding cycle timeconstant.The ideal temperature is 45℃.Adjust thetemperature control valve (Fig.2-2 3 ) to keep the oiltemperature between 40℃ and 55℃.The temperature controlvalve controls the volume of cooling water for the oilcooler in accordance with the temperature of hydraulic oilin the reservoir.As the temperature of coling water mayvary from season to season,it is necessary to check the oiltemperature indicated on the oil thermometer and to adjustthe valve if the temperature is out ot the above mentionedoorange.Turning the knob on the valve clockwise willincrease the volume of cooling water for the oil cooler toincrease its cooling capacity.
英语翻译Hydraulic oil TemperatureThe temperature of hydraulic oil must be maintained at aproper temperature to keep the moulding cycle timeconstant.The ideal temperature is 45℃.Adjust thetemperature control valve (Fig.2-2 3 ) to keep the oiltem
液压油油温
为了保持浇注周期稳定,液压油的温度必须保持在合适的温度.理想的温度是45℃.调节温控阀来使得油温保持在40~55℃之间.温度控制阀能够根据油箱中的油温来控制流向液压油冷却器的冷却水量.由于冷却水的温度会随季节而变化,因此有必要去检查油温表的指示并在油温超过上述范围时调节温控阀.顺时针旋转温控阀上的旋钮就会增加流向油冷器的冷却水量从而增加它的冷却能力.