黄铜镀锡一般用哪种锡,急需此锡的MSDS报告锡的MSDS报告

来源:学生作业帮助网 编辑:作业帮 时间:2024/11/09 09:53:36

黄铜镀锡一般用哪种锡,急需此锡的MSDS报告锡的MSDS报告
黄铜镀锡一般用哪种锡,急需此锡的MSDS报告
锡的MSDS报告

黄铜镀锡一般用哪种锡,急需此锡的MSDS报告锡的MSDS报告
声明; 我不知道 用哪种 但是可提供 MSDS ,
  **** MATERIAL SAFETY DATA SHEET ****
  TIN, 30 MESH, REAGENT ACS (GRANULAR)
  **** SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION ****
  MSDS Name: TIN, 30 MESH, REAGENT ACS (GRANULAR)
  Catalog Numbers:
  42099-0000, 42099-5000
  Synonyms:
  Company Identification (Europe): Acros Organics BVBA
  Janssen Pharmaceuticalaan 3a
  2440 Geel, Belgium
  Company Identification (USA): Acros Organics
  One Reagent Lane
  Fairlawn, NJ 07410
  **** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
  +----------------+--------------------------------------+----------+-----------+-----------+---------------+
  | CAS# | Chemical Name | % | EINECS# |Haz Symbols| Risk Phrases |
  |----------------|--------------------------------------|----------|-----------|-----------|---------------+
  | 7440-31-5 |TIN, 30 MESH, REAGENT ACS (GRANULAR) | | 231-141-8 |||
  +----------------+--------------------------------------+----------+-----------+-----------+---------------+
  Hazard Symbols: None Listed.
  Risk Phrases: None Listed.
  **** SECTION 3 - HAZARDS IDENTIFICATION ****
  EMERGENCY OVERVIEW
  Not available.
  Potential Health Effects
  Eye:
  May cause eye irritation.
  Skin:
  May cause skin irritation.
  Ingestion:
  The toxicological properties of this substance have not been fully
  investigated. May be harmful if swallowed.
  Inhalation:
  May cause respiratory tract irritation. The toxicological properties
  of this substance have not been fully investigated.
  Chronic:
  Not available.
  **** SECTION 4 - FIRST AID MEASURES ****
  Eyes:
  Flush eyes with plenty of water for at least 15 minutes,
  occasionally lifting the upper and lower eyelids. Get medical aid.
  Skin:
  Get medical aid. Flush skin with plenty of water for at least 15
  minutes while removing contaminated clothing and shoes.
  Ingestion:
  Get medical aid immediately. Wash mouth out with water.
  Inhalation:
  Remove from exposure and move to fresh air immediately. If not
  breathing, give artificial respiration. If breathing is difficult,
  give oxygen. Get medical aid.
  Notes to Physician:
  **** SECTION 5 - FIRE FIGHTING MEASURES ****
  General Information:
  As in any fire, wear a self-contained breathing apparatus in
  pressure-demand, MSHA/NIOSH (approved or equivalent), and full
  protective gear.
  Extinguishing Media:
  Use extinguishing media most appropriate for the surrounding fire.
  **** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
  General Information: Use proper personal protective equipment as indicated
  in Section 8.
  Spills/Leaks:
  Vacuum or sweep up material and place into a suitable disposal
  container.
  **** SECTION 7 - HANDLING and STORAGE ****
  Handling:
  Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin
  and eyes.
  Storage:
  Store in a cool, dry place. Store in a tightly closed container.
  **** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
  Engineering Controls:
  Use adequate ventilation to keep airborne concentrations low.
  Personal Protective Equipment
  Eyes:
  Wear appropriate protective eyeglasses or chemical
  safety goggles as described by OSHA's eye and face
  protection regulations in 29 CFR 1910.133 or European
  Standard EN166.
  Skin:
  Wear appropriate protective gloves to prevent skin
  exposure.
  Clothing:
  Wear appropriate protective clothing to prevent skin
  exposure.
  Respirators:
  Follow the OSHA respirator regulations found in 29
  CFR 1910.134 or European Standard EN 149. Always use
  a NIOSH or European Standard EN 149 approved
  respirator when necessary.
  **** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
  Physical State: Powder
  Color: grey metal - granular
  Odor: Not available.
  pH: Not available.
  Vapor Pressure: 1 mm Hg @ 1492 deg C
  Viscosity: Not available.
  Boiling Point: 2270 deg C @ 760.00mm Hg
  Freezing/Melting Point: 231.9 deg C
  Autoignition Temperature: 630 deg C ( 1,166.00 deg F)
  Flash Point: Not available.
  Explosion Limits, lower: Not available.
  Explosion Limits, upper: Not available.
  Decomposition Temperature:
  Solubility in water: insoluble
  Specific Gravity/Density:
  Molecular Formula: Sn
  Molecular Weight: 118.71
  **** SECTION 10 - STABILITY AND REACTIVITY ****
  Chemical Stability:
  Stable under normal temperatures and pressures.
  Conditions to Avoid:
  Incompatible materials.
  Incompatibilities with Other Materials:
  Strong oxidizing agents, acids, strong bases, halogens, copper
  nitrate, sodium.
  Hazardous Decomposition Products:
  Not available.
  Hazardous Polymerization: Will not occur.
  **** SECTION 11 - TOXICOLOGICAL INFORMATION ****
  RTECS#:
  CAS# 7440-31-5: XP7320000
  LD50/LC50:
  Not available.
  Carcinogenicity:
  TIN, 30 MESH, REAGENT ACS (GRANULAR) -
  Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
  Other:
  See actual entry in RTECS for complete information.
  **** SECTION 12 - ECOLOGICAL INFORMATION ****
  Ecotoxicity:
  Dictionary of Substances and Their Effects 1992
  **** SECTION 13 - DISPOSAL CONSIDERATIONS ****
  Dispose of in a manner consistent with federal, state, and local regulations.
  **** SECTION 14 - TRANSPORT INFORMATION ****
  IATA
  No information available.
  IMO
  No information available.
  RID/ADR
  No information available.
  **** SECTION 15 - REGULATORY INFORMATION ****
  European/International Regulations
  European Labeling in Accordance with EC Directives
  Hazard Symbols: Not available.
  Risk Phrases:
  Safety Phrases:
  S 24/25 Avoid contact with skin and eyes.
  WGK (Water Danger/Protection)
  CAS# 7440-31-5: No information available.
  United Kingdom Occupational Exposure Limits
  United Kingdom Maximum Exposure Limits
  Canada
  CAS# 7440-31-5 is listed on Canada's DSL List.
  CAS# 7440-31-5 is listed on Canada's Ingredient Disclosure List.
  Exposure Limits
  CAS# 7440-31-5: OEL-AUSTRALIA:TWA 0.1 mg(Sn)/m3;Skin
  OEL-AUSTRALIA:TWA 2 mg/m3
  OEL-BELGIUM:TWA 2 mg/m3
  OEL-DENMARK:TWA 2 mg/m3
  OEL-FINLAND:TWA 2 mg/m3
  OEL-GERMANY:TWA 2 mg/m3
  OEL-HUNGARY:TWA 1 mg/m3;STEL 2 mg/m3;Skin
  OEL-THE NETHERLANDS:TWA 2 mg/m3
  OEL-THE PHILIPPINES:TWA 2 mg/m3
  OEL-SWITZERLAND:TWA 2 mg/m3;STEL 4 mg/m3
  OEL-THAILAND:TWA 2 mg/m3
  OEL-UNITED KINGDOM:TWA 5 mg/m3;STEL 10 mg/m3 JAN9
  OEL IN BULGARIA, COLOMBIA, JORDAN, KOREA check ACGIH TLV
  OEL IN NEW ZEALAND, SINGAPORE, VIETNAM check ACGI TLV
  US FEDERAL
  TSCA
  CAS# 7440-31-5 is listed on the TSCA inventory.
  **** SECTION 16 - ADDITIONAL INFORMATION ****
  MSDS Creation Date: 10/21/1996 Revision #0 Date: Original.
  The information above is believed to be accurate and represents the best
  information currently available to us. However, we make no warranty of
  merchantability or any other warranty, express or implied, with respect to
  such information, and we assume no liability resulting from its use. Users
  should make their own investigations to determine the suitability of the
  information for their particular purposes. In no way shall the company be
  liable for any claims, losses, or damages of any third party or for lost
  profits or any special, indirect, incidental, consequential or exemplary
  damages, howsoever arising, even if the company has been advised of
  the possibility of such damages.
  --------------------------------------------------------------------------------

黄铜镀锡一般用哪种锡,急需此锡的MSDS报告锡的MSDS报告 镀锡黄铜焊接端子焊接时为什么外层的锡掉落,漏出里面的铜材? 编织镀锡黄铜,编织镀锡铜包铜哪厂有卖 急 黄铜端子电镀问题图档要求的只是镀锡最小2.5um.但在做的时候都是先镀的镍,再镀的锡.难道不能不只镀锡吗? 想问一下,黄铜镀锡和黄铜镀镍的端子会被氨气或者氨水腐蚀吗? 急需溴酚蓝MSDS(安全技术说明书)完整点的, 镀锡性能黄铜好还是紫铜好 为什么装食品的罐头一般用镀锡的铁制造,而不用锡制造 用黄铜做的笔杆,一般是用哪种牌号的黄铜 关于提供MSDS报告的疑惑和产品成份宣告表比如我现在本来自己家是做冲压铜片的,但是后处理要镀锡,那我的客人要求我提供锡的MSDS报告,那我填的制造商名称是写我的供应商还是直接写我自 金属加工的黄铜一般用什么材料 镀锡铜与黄铜铜价做电线用的,相同规格的,镀锡铜与裸铜铜价,哪个更贵,做电线时,镀锡铜与裸铜,用哪种铜更便宜?我问的是:都是纯铜,哪个贵 镀锡铜如何分解上面的锡? 急需一份碳酸氢钠MSDS(安全技术说明书), 1#润滑脂MSDS报告谁有啊急需 马口铁为什么要镀锡?铁比锡活泼,镀锡不是加快铁的腐蚀吗? 热镀锡、电镀锡厚度一般到多少厚度 黄铜端子电镀问题做测试治具,成千上万次的插拔,高压.现端子发黑,短路.电镀什么好?听说镀锡是最常用的,但是镀锡也会发黑啊,会影响导电性么?