英语翻译产品由箱体、器身、瓷套构成（见图5）,器身安置在产品下部箱体内,器身由一次绕组和二次绕组、铁心、屏蔽罩和夹件构成,共有3个二次绕组（含一个剩余电压绕组）,二次绕组引出

英语翻译产品由箱体、器身、瓷套构成（见图5）,器身安置在产品下部箱体内,器身由一次绕组和二次绕组、铁心、屏蔽罩和夹件构成,共有3个二次绕组（含一个剩余电压绕组）,二次绕组引出
英语翻译
产品由箱体、器身、瓷套构成（见图5）,器身安置在产品下部箱体内,器身由一次绕组和二次绕组、铁心、屏蔽罩和夹件构成,共有3个二次绕组（含一个剩余电压绕组）,二次绕组引出线接到箱体和接线盘上,供用户连接负荷使用,互感器内部腔体充满S F6气体,各部件之间有良好的密封性防止气体泄露,箱体上装有防爆膜,以防止线路出现故障时,SF6气体膨胀引起事故.

英语翻译产品由箱体、器身、瓷套构成（见图5）,器身安置在产品下部箱体内,器身由一次绕组和二次绕组、铁心、屏蔽罩和夹件构成,共有3个二次绕组（含一个剩余电压绕组）,二次绕组引出
快而准的来啦!
This product is composed of a tank,core,winding assembly and insulating porcelain jacket (refer to diagram 5).The winding assembly is in the tank situated at the bottom,the assembly comprises primary and secondary windings,core,shielding case and clamping pieces.There are 3 secondary windings (including a residual voltage winding),the extension lines of the secondary windings are joined to the tank and patch board,so that user can connect load for application.The cavity of the dual inductor is filled with S F6 gas,air tightness is ensured between parts to prevent gas leakage; a bursting disk is fixed on the tank to avoid accident caused by the S F6 gas expansion when there is a line failure.
【英语牛人团荣誉会员】

前面的机器翻译很不通，你也给加分???

Products by the box, device body, Bushing structure (see Figure 5), the body of the lower cabinets in product placement, the body of the primary winding and secondary winding, core, shield and clampin...

全部展开

Products by the box, device body, Bushing structure (see Figure 5), the body of the lower cabinets in product placement, the body of the primary winding and secondary winding, core, shield and clamping structure, a total of three secondary winding (with a residual voltage winding), secondary winding and wiring Lead Cabinet received a disk for the user to connect load to use, transformer internal cavity filled with S F6 gas, between the various components have a good seal to prevent gas leak, explosion-proof box equipped with a membrane to prevent line failure, SF6 gas expansion caused by accident

收起

The product is made up of the body and body composition, porcelain jacket (to see the chart 5).The body of the product is placed in the cabinet, and it consists of a primary and secondary windings ,ir...

全部展开

The product is made up of the body and body composition, porcelain jacket (to see the chart 5).The body of the product is placed in the cabinet, and it consists of a primary and secondary windings ,iron core ，shielding case, clip thing and three secondary windings (including a surplus voltage winding).The outgoing wire of the secondary winding is connected to the cabinet, used for users to connect load. The transformer internal cavity is filled up with SF6 gas, and nice sealing among each aparts could prevent the gas leak.Also the cabinet is coverd with anti-blast film, in order to prevent the lines malfunction and accidents caused by SF6 gas inflation.希望可以帮你，呵呵

收起