作业帮帮手译下这段英文Two settings are available in the resistance measurementmode:the upper limit and lower limit value settings.In thelow-resistance and voltage measurement mode,the upper limitand lower limit value settings can be made separately
来源：学生作业帮助网 编辑：作业帮 时间：2024/11/15 12:15:52
帮手译下这段英文Two settings are available in the resistance measurementmode:the upper limit and lower limit value settings.In thelow-resistance and voltage measurement mode,the upper limitand lower limit value settings can be made separately
帮手译下这段英文
Two settings are available in the resistance measurement
mode:the upper limit and lower limit value settings.In the
low-resistance and voltage measurement mode,the upper limit
and lower limit value settings can be made separately for the
two measurement items.When both are determined as IN,
PASS is indicated,in other cases FAIL is indicated.In addition
to the Hi/IN/Lo and PASS/FAIL indications,the results can
also be signaled by a buzzer and output via an open-collector
output.
Up to 30 comparator configuration tables can be memorized,
each storing settings for a measurement mode,measurement
range,upper and lower limit values and a buzzer mode.
大约是说设定了电阻和电压的范围,然后呢就是当不在这个范围内就蜂鸣器会响之类的,这个蜂鸣器会不会响,什么条件下响,我就没看清楚.帮帮手,伙记.
■ Comparator setting example
Resistance range 300 mΩ (upper
limit value 180.00 mΩ/lower limit
value 170.00 mΩ),voltage range 5
V (upper limit value 3.8000 V/lower
limit value 3.5000 V),Table No.1,
buzzer set to sound for PASS.
帮手译下这段英文Two settings are available in the resistance measurementmode:the upper limit and lower limit value settings.In thelow-resistance and voltage measurement mode,the upper limitand lower limit value settings can be made separately
两个设置可在电阻测量
方式：上限,下限值设置.在
低电阻和电压测量模式下,上限
和值设置下限可分别为
两个测量项目.当两个被评定,
PASS是表示,在失败的表示,其他案件.此外
对高/中/低和通过/失败的迹象,但结果可以
也标志着一个蜂鸣器输出通过一个开路集电极
输出.
最多30比较的配置表可以记忆,
为测量模式,测量每个存储设置
范围,上限和下限的价值观和蜂鸣器模式.比较器设置示例
阻值范围300毫欧（上
限制值180.00毫欧/下限
值170.00毫欧）,电压范围5
五（上限价值3.8000第V /低
限制值3.5000五）,表1,
蜂鸣器设置良好的密码.