ansys 加载时出现提示信息,我在加载节点面荷载时,“Both solid model and finite element model boundary conditions have been applied to this model.As solid loads are transferred to the nodes or elements,they can overwrite directly appl
来源:学生作业帮助网 编辑:作业帮 时间:2024/10/03 05:19:47
ansys 加载时出现提示信息,我在加载节点面荷载时,“Both solid model and finite element model boundary conditions have been applied to this model.As solid loads are transferred to the nodes or elements,they can overwrite directly appl
ansys 加载时出现提示信息,
我在加载节点面荷载时,
“Both solid model and finite element model boundary conditions have been
applied to this model.As solid loads are transferred to the nodes or
elements,they can overwrite directly applied loads.”
我加载的命令流是:
LOCAL,11,1,0,1.55,0,,,,1,1,
csys,11
allsel
cmsel,s,jg
ESLV,S
NSLe,S
NSEL,s,LOC,Z,18.5-h,H1-h
NSEL,r,LOC,y,180,360
NSEL,R,LOC,x,1.54,1.56
CM,JXM-1,NODE
sfgrad,pres,0,z,18.5-h,-gm
sf,all,pres,gm*(h1-18.5)
前面已经定义了H与H1.
ansys 加载时出现提示信息,我在加载节点面荷载时,“Both solid model and finite element model boundary conditions have been applied to this model.As solid loads are transferred to the nodes or elements,they can overwrite directly appl
没有关系的,因为ansys提供单元载荷和实体载荷,存在一个转换,也就是提示你有转换了,一般不会影响预期的结果