英语翻译1.Start Windows XP2.Click the Start button; point to Settings and click on Control Panel.3.Select and click on Printers and Other Hardware4.Click on the Display icon.5.Choose the Settings tab and then click the Advanced button.6.Choose th

英语翻译1.Start Windows XP2.Click the Start button; point to Settings and click on Control Panel.3.Select and click on Printers and Other Hardware4.Click on the Display icon.5.Choose the Settings tab and then click the Advanced button.6.Choose th
英语翻译
1.Start Windows XP
2.Click the Start button; point to Settings and click on Control Panel.
3.Select and click on Printers and Other Hardware
4.Click on the Display icon.
5.Choose the Settings tab and then click the Advanced button.
6.Choose the Monitor tab
- If the 'Properties' button is inactive,your monitor is properly configured.Please stop installation.
- If the Properties button is active,click on the Properties button and proceed to step 7.
7.Click on Driver and Update Driver.
8.Choose the Install from a list or specific location [advanced] button
9.Click Next and then the Have Disk button
10.Choose the Don't Search.I will choose the driver to install button.Click on the Next button
11.Click the Have Disk button.
12.Click the Browse button and choose the drive in which you've placed the disk.Example:F:(CD-ROM Drive).
11.Click the Open button.
13.Click the OK button and choose your monitor model.Click on the Next button.
- If the Has not passed Windows Logo testing to verify its compatibility with Windows XP message appears,click the Continue Anyway button.
14.Click on the Finish button and then the Close button
15.Click OK button twice to close the Display Properties dialog box.

英语翻译1.Start Windows XP2.Click the Start button; point to Settings and click on Control Panel.3.Select and click on Printers and Other Hardware4.Click on the Display icon.5.Choose the Settings tab and then click the Advanced button.6.Choose th
1.启动Windows XP
2.单击开始按钮,指向设置,点击控制面板.
3.选择并点击打印机和其他硬件
4.点击显示图标.
5.选择设置选项卡,然后单击高级按钮.
6.选择监视器选项卡
- 如果'属性'按钮是无效的,您的显示器已正确配置.请停止安装.
- 如果属性按钮被激活,点击属性按钮上,然后继续步骤7.
7.点击驱动程序和更新驱动程序.
8.选择从列表或指定位置安装[高级]按钮
9.单击下一步,然后从磁盘安装按钮
10.选择不要搜寻.我要自己选择要安装的驱动按钮.点击下一步按钮
11.单击从磁盘安装按钮.
12.点击浏览按钮,选择在其中您放置在磁盘驱动器.例如：传真：（CD - ROM的驱动器）.
11.单击打开按钮.
13.点击确定按钮,并选择您的显示器型号.点击下一步按钮.
- 如果没有通过Windows徽标测试,无法验证它与Windows XP兼容的消息出现,点击仍然继续按钮.
14.点击完成按钮,然后关闭按钮
15.单击确定按钮两次以关闭显示属性对话框.

1 Start Windows XP启动Windows XP
2 Click the Start button; point to Settings and click on Control Panel.单击开始按钮，指向设置，点击控制面板
3. Select and click on Printers and Other Hardware选择并点击打印机和其他硬件
4. ...

全部展开

1 Start Windows XP启动Windows XP
2 Click the Start button; point to Settings and click on Control Panel.单击开始按钮，指向设置，点击控制面板
3. Select and click on Printers and Other Hardware选择并点击打印机和其他硬件
4. Click on the Display icon.点击显示图标
5. Choose the Settings tab and then click the Advanced button.选择设置选项卡，然后单击高级按钮
6. Choose the Monitor tab选择监视器选项卡
- If the 'Properties' button is inactive, your monitor is properly configured. Please stop installation. 如果'属性'按钮是无效的，您的显示器已正确配置。请停止安装。
- If the Properties button is active, click on the Properties button and proceed to step如果属性按钮被激活，点击属性按钮上，然后继续步骤
7. Click on Driver and Update Driver. 点击驱动程序和更新驱动程序
8. Choose the Install from a list or specific location [advanced] button选择从列表或指定位置安装[高级]按钮
9. Click Next and then the Have Disk button单击下一步，然后从磁盘安装按钮
10. Choose the Don't Search. I will choose the driver to install button. Click on the Next button 选择不要搜寻。我要自己选择要安装的驱动按钮。点击下一步按钮
11. Click the Have Disk button. 单击从磁盘安装按钮
12. Click the Browse button and choose the drive in which you've placed the disk. Example: F: (CD-ROM Drive). 点击浏览按钮，选择在其中您放置在磁盘驱动器。例如：传真：（CD - ROM的驱动器）。
11. Click the Open button.单击打开按钮
13. Click the OK button and choose your monitor model. Click on the Next button. 点击确定按钮，并选择您的显示器型号。点击下一步按钮
- If the Has not passed Windows Logo testing to verify its compatibility with Windows XP message appears, click the Continue Anyway button. 如果没有通过Windows徽标测试，无法验证它与Windows XP兼容的消息出现，点击仍然继续按钮
14. Click on the Finish button and then the Close button 点击完成按钮，然后关闭按钮
15. Click OK button twice to close the Display Properties dialog box. 单击确定按钮两次以关闭显示属性对话框

收起

1。启动Windows XP
2。点击“开始”键;指出设置,点击控制板。
3。选择并点击打印机和其他的硬件
4。点击显示图标。
5。选择设置选项卡,然后单击“高级”按钮。
6。选择监视标签

——如果是消极的,性能的按钮显示器是适当地组态。请停止安装。
-如果属性按钮被激活时,单击下一步按钮和性能。

全部展开

1。启动Windows XP
2。点击“开始”键;指出设置,点击控制板。
3。选择并点击打印机和其他的硬件
4。点击显示图标。
5。选择设置选项卡,然后单击“高级”按钮。
6。选择监视标签

——如果是消极的,性能的按钮显示器是适当地组态。请停止安装。
-如果属性按钮被激活时,单击下一步按钮和性能。
7。点击司机和更新驱动。
8。从列表中选择安装或特定的位置[高级]按钮
9。点击“下一步”,然后有磁盘按钮
10。选择不搜索。我将选择驱动安装按钮。单击下一步按钮
11分。点击有磁盘按钮。
12。点击浏览按钮和选择驱动,你已经把磁盘。例证:F(磁盘)。
11分。点击“打开”按钮。
13。点击“确定”按钮,选择你的监测模型。单击下一步按钮。
-如果没有经过测试,以验证标志的视窗XP兼容的出现,点击信息仍然继续按钮。
14。点击完成按钮,然后关闭按钮
15。单击OK按钮两次关闭了显示属性对话框。

收起