英语翻译CERTIFICATE OF CONFORMANCEISSUED TO:Customer:Contact:Phone:PO#:INSTRUMENT:Make:International MedcomType:Digital Rate MeterModel:Inspector AlertDetector:Internal G-M LND7317S/N:31931S.E.International,lnc.certifies that the above described
来源:学生作业帮助网 编辑:作业帮 时间:2024/08/30 03:31:57
英语翻译CERTIFICATE OF CONFORMANCEISSUED TO:Customer:Contact:Phone:PO#:INSTRUMENT:Make:International MedcomType:Digital Rate MeterModel:Inspector AlertDetector:Internal G-M LND7317S/N:31931S.E.International,lnc.certifies that the above described
英语翻译
CERTIFICATE OF CONFORMANCE
ISSUED TO:
Customer:
Contact:
Phone:
PO#:
INSTRUMENT:
Make:International Medcom
Type:Digital Rate Meter
Model:Inspector Alert
Detector:Internal G-M LND7317
S/N:31931
S.E.International,lnc.certifies that the above described instrument was electronically calibrated with a pulse generator to factory specifications.The accuracy is typically ±15%
of reading relative to Cs 137.This Electronic Calibration complies with MIL STD 45662.
temperature:70°
Rel.Humidity:42%
DATE OF ELECTRONIC CALIBRATION:OCTOBER25,2006
CAL INTERVAL:12 MONTHS
This certificate warrants that the factory calibration is valid for 12 months from the date placed in service.
NOTICE:*The “Due DATE of Recalibration” may be established(by the customer)by adding the “Cal Interval” to the
“Date (the instrument) is Placed in Service”
*Date placed in Service:
*Due Date of Recalibration:
Calibrated by ___________
Place sticker on instrument
Date Printed:October 31,2006
以上就是内容,我急用~
英语翻译CERTIFICATE OF CONFORMANCEISSUED TO:Customer:Contact:Phone:PO#:INSTRUMENT:Make:International MedcomType:Digital Rate MeterModel:Inspector AlertDetector:Internal G-M LND7317S/N:31931S.E.International,lnc.certifies that the above described
CERTIFICATE OF CONFORMANCE
一致证明书
ISSUED TO:
发布给:
Customer:
顾客:
Contact:
合约
Phone:
电话:
PO#:
邮政编码:
INSTRUMENT:
器械:
Make: International Medcom
制造:国际医药公司
Type: Digital Rate Meter
类型:数码比率米
Model: Inspector Alert
型号:检测预警
Detector: Internal G-M LND7317
探测器:内部 G-M LND7317
S/N: 31931
S.E. International, lnc. certifies that the above described instrument was electronically calibrated with a pulse generator to factory specifications. The accuracy is typically ±15%
of reading relative to Cs 137. This Electronic Calibration complies with MIL STD 45662.
S.E.国际公司证明上述仪器属于厂家规格的电子校准脉冲发生器.读取准确率为±15% Cs137. 此电子校准仪满足MIL STD 45662的条件.
temperature:70°
温度:70度
Rel. Humidity: 42%
相对湿度:42%
DATE OF ELECTRONIC CALIBRATION: OCTOBER25,2006
电子校准仪生产日期:2006年10月25日
CAL INTERVAL :12 MONTHS
产品使用周期:12个月
This certificate warrants that the factory calibration is valid for 12 months from the date placed in service.
此证明书保证,厂家的校准仪在开始使用以后的12个月内有效.
NOTICE:*The “Due DATE of Recalibration” may be established(by the customer)by adding the “Cal Interval” to the
“Date (the instrument) is Placed in Service”
注意:“重新校准的到期日”可能(由顾客)把“使用周期”算到“(仪器)开始使用日期”内
*Date placed in Service:
*开始使用日期:
*Due Date of Recalibration:
*重新校准到期日:
Calibrated by ___________
由___________校准
Place sticker on instrument
将标签贴到仪器上
Date Printed: October 31,2006
印刷日期:2006年十月31日
我翻完拉.