USE IEEE.STD_LOGIC_UNSIGNED.ALL; 报错LIBRARY IEEE;USE IEEE.STD_LOGIC_1164.ALLUSE IEEE.STD_LOGIC_UNSIGNED.ALL;ENTITY CNT10 ISPORT (CLK,RST,EN,LOAD:IN STD_LOGIC;DATA:IN STD_LOGIC_VECTOR(3 DOWNTO 0);DOUT:OUT STD_LOGIC_VECTOR(3 DOWNTO 0);COUT:OUT STD_L
来源:学生作业帮助网 编辑:作业帮 时间:2024/08/27 03:07:28
USE IEEE.STD_LOGIC_UNSIGNED.ALL; 报错LIBRARY IEEE;USE IEEE.STD_LOGIC_1164.ALLUSE IEEE.STD_LOGIC_UNSIGNED.ALL;ENTITY CNT10 ISPORT (CLK,RST,EN,LOAD:IN STD_LOGIC;DATA:IN STD_LOGIC_VECTOR(3 DOWNTO 0);DOUT:OUT STD_LOGIC_VECTOR(3 DOWNTO 0);COUT:OUT STD_L
USE IEEE.STD_LOGIC_UNSIGNED.ALL; 报错
LIBRARY IEEE;
USE IEEE.STD_LOGIC_1164.ALL
USE IEEE.STD_LOGIC_UNSIGNED.ALL;
ENTITY CNT10 IS
PORT (CLK,RST,EN,LOAD:IN STD_LOGIC;
DATA:IN STD_LOGIC_VECTOR(3 DOWNTO 0);
DOUT:OUT STD_LOGIC_VECTOR(3 DOWNTO 0);
COUT:OUT STD_LOGIC);
END CNT10;
ARCHITECTURE behav OF CNT10 IS
BEGIN
PROCESS(CLK,RST,EN,LOAD)
VARIABLE Q:STD_LOGIC_VECTOR(3 DOWNTO 0);
BEGIN
IF RST='0' THEN Q:=(OTHERS=>'0');
ELSIF CLK' EVENT AND CLK='1' THEN
IF EN='1' THEN
IF (LOAD='0') THEN Q:=DATA;ELSE
IF Q'0');
ENDIF;
ENDIF;
ENDIF;
ENDIF;
IF Q="1001" THEN COUT
USE IEEE.STD_LOGIC_UNSIGNED.ALL; 报错LIBRARY IEEE;USE IEEE.STD_LOGIC_1164.ALLUSE IEEE.STD_LOGIC_UNSIGNED.ALL;ENTITY CNT10 ISPORT (CLK,RST,EN,LOAD:IN STD_LOGIC;DATA:IN STD_LOGIC_VECTOR(3 DOWNTO 0);DOUT:OUT STD_LOGIC_VECTOR(3 DOWNTO 0);COUT:OUT STD_L
第二行少了个分号,后面连续的四个end if中间是有空格的~